Wednesday, July 13, 2011

18. STABILIZERS

Stabilizers are an indispensable part of almost all rotary directional BHAs. 

Near-bit stabilizers have BOX x BOX connections. They are usually bored out to accept a float valve. 

String stabilizers have PIN x BOX connections. 

Most stabilizers have a right-hand spiral.

Stabilizers are used to:
Control hole deviation.
Reduce the risk of differential sticking.
Ream out doglegs and keyseats.

Here we are going to discuss the following types of stabilizer :
Integral Blade Stabilizers
Welded Blade Stabilizers
Sleeve Type Stabilizers 
Clamp-on Stabilizers
Non-Rotating Stabilizers

INTEGRAL BLADE STABILIZERS (IB)


I.B. stabilizers are made from high-strength alloy steel as a single piece tool. They are rolled and machined to provide the blades.

The unitized construction features three spiraled ribs designed to minimize down hole torque, reduce damage to the hole wall and ensure maximum fluid circulation. 

The IBS is well suited for use in most formations from soft and sticky to hard and abrasive. 

It is available in both bottom-hole and string designs, providing the flexibility to run it anywhere in the BHA.
When the blades wear down to an unacceptable diameter, the tool should be removed from the drilling assembly and returned for servicing where it can usually be redressed to full gauge size. 

They can have either three or four blades. 

I.B. stabilizers normally have tungsten carbide inserts (TCIs). Pressed-in TCIs are recommended in abrasive
formations.

Features and Benifits :

The blades are an integral part of the tool body, eliminating the risk of leaving components or pieces in the hole.
Available in both “open” and “full wrap” designs, providing optimum hole wall contact while ensuring maximum fluid bypass area.

Application in Directional Drilling :

A packed hole assembly typically requires the placement of multiple IB stabilizers throughout the three zones of stabilization. Contact a OTI - representative for BHA recommendations.
A pendulum assembly is a recommended application for the IBS due to its unitized design. For the most effective pendulum assembly, two stabilizers should be run separated by one drill collar.
Vibration and drill collar whip can be reduced through the placement of stabilizers in the BHA and upper drill collar string.

Extended Life IBS Specification :

Standard IBS Specification :


WELDED BLADE STABILIZERS (WBS) :

The Welded Blade Stabilizers used in the B.H.A for drilling soft to medium hard formation holes are available in three types (straight, straight-offset or spiral design).

They are best suited to large hole sizes where the formation is softer because they allow maximum flow rates to be used.
Stabilizer bodies are manufactured from AISI 4145 H Modified Steel with mechanical properties in accordance with API Specification 7.

Mid steel blades are welded onto the body using strictly controlled pre-heating, post weld heat treatment and weld application techniques.

All areas affected by the process of welding are subject to full non-destructive examination to assure the mechanical integrity of the joint.

Standard Welded  Blade Stabilizers are available in 3 or 4 blade configuration with the spiral type available with open or tight spiral.

HF 1000 or HF 2000 Hardfacings are most commonly applied to Welded Blade Stabilizers.







Standard dimension of WBS :

Welded blade stabilizers are available in following three configurations: 


NOTE : IBS are more expensive than welded blade type stabilizers, since they are machined from one piece of metal.


SLEEVE TYPE STABILIZERS :

These consist of replaceable sleeves that are mounted on the stabilizer body. They offer the advantage of changing out a sleeve with worn blades or replacing it with one of another gauge size. The blades can be dressed with tungsten carbide inserts for abrasive formations.


Sleeves :
There are two main designs of sleeve-type stabilizer as shown in figure below:

Two-piece stabilizer (mandrel and sleeve):

The sleeve is screwed onto the coarse threads on the outside of the mandrel and torqued up to the recommended value. 
Sleeve makeup torque is low. 
There is no pressure seal at the sleeve. 
It is convenient to change sleeves on the drill floor. 
This design of stabilizer is manufactured by several companies. 
It is in wide use today.

Three-piece stabilizer (mandrel, sleeve and saver sub):

The sleeve is screwed onto the mandrel first, by hand. 
The saver sub is then screwed into the mandrel and this connection is torqued up to the recommended value. 
In this case, there is a mud pressure seal at the mandrel/saver sub connection. Makeup torque of this connection is the full value for that size of API connection. 
Great care must be taken (clean and dope the shoulders properly, use correct makeup torque), otherwise downhole washouts etc. will result. 
It can be quite difficult any time-consuming to change/service the sleeve. For these reasons, this design of sleeve-type stabilizer is not as widely used today as it was some years ago.


CLAMP-ON STABILIZER

Clamp-on stabilizers allow more flexibility in BHA design. 
They can be positioned on NMDCs, MWD, PDMs etc. at the required spacing to maintain directional control. 
Nonmagnetic clamp-on stabilizers are available on request Some clients are apprehensive about running clamp-on because of the danger of them moving position downhole. Sometimes they’re difficult to take off after POOH.


NON- ROTATING STABILIZER

These stabilizers are used to centralize the drill collars, but the rubber sleeve allows the string to rotate while the sleeve remains stationary. The wear on the blades is therefore much less than in other stabilizers and so they can be used in harder formations.



Stabilizers can be installed just above the bit (near-bit stabilizers) or at any point within the BHA (string stabilizers). 

Two stabilizers can also be run in tandem if necessary ("piggy-back"). Stabilizers are inserted at drill collar connections. This limits their spacing to 30 ft or multiples of 30 ft.
 
Closer spacing can be achieved by using shorter drill collars (pony collars) that are 10-15 ft long. 

"Clamp on" stabilizers can be used to provide support at some point along the length of a collar. 

Any stabilizer that is placed near a magnetic surveying tool must be made of non-magnetic material, to prevent distortion of the survey results.




HARDFACINGS :

Hardfacing is a metalworking process where harder or tougher material is applied to a base metal. It is welded to the base material, and is generally takes the form of specialized electrodes for arc welding or filler rod for oxyacetylene and TIG welding.
Hardfacing may be applied to a new part during production to increase its wear resistance, or it may be used to restore a worn-down surface.

HF 1000
Crushed tungsten carbide held in a nickel bronze matrix. The 3mm grain size ensures greater concentration of carbide which is ideal for soft formation drilling.


HF 2000
Trapezoidal tungsten carbide inserts held in a sintered carbide nickel bronze matrix. This will give a greater depth of carbide coverage – ideal for high deviation drilling in abrasive formations.


HF 3000
Tungsten carbide inserts set in a powder spray deposit ideal for abrasive formations. 97% bonding guaranteed, certified by ultrasonic report. Recommended for non-magnetic stabilizers.






HF 4000
Tungsten carbide inserts (button type). The inserts have been developed to allow cold insertion and maintain close fit. A greater concentration of inserts on the bottom third of the blade and leading edge will increase surface contact to reduce wear in highly abrasive formations.

HF 5000
This oxy-acetylene process applies tough molten carbide particles of varying sizes held in a nickel chrome matrix which provides excellent bonding properties and greater surface wear characteristics are achieved. Surface hardness levels over 40 HRC. Ideal for GEO-THERMAL applications over 350°.






HF 5000
This process is a highly automated way of applying hardface and utilizes a combined arc/plasma stream on the work piece surface. This results a low base metal dilution and a dense, uniform coating, the filling medium can be variety of hardfacing consumables.





BLOG ENDS

27 comments:

  1. Hi there. Nice blog. You have shared useful information. Keep up the good work! This blog is really interesting and gives good details. AC Stabilizers Suppliers in India, AC wall mounted voltage stabilizer.

    ReplyDelete
  2. It is a very nice article which will be useful for lot many people like me who is new to this field. Can you also suggest (or) post the detailed procedure for redressing of stabilizers?

    ReplyDelete
  3. Ι ωаntеd tо thank уou for this great
    гead!! І certаinly loveԁ eѵery bіt οf it.

    I hаve you savеd as a fаvorite to looκ at new things уou pοst…

    Feel fгee to ѵisit my homeрage: take me back lyrics

    ReplyDelete
  4. Thanks foг shаring уour infο.

    Ӏ truly aрpreciate your effortѕ and ӏ will be waiting fοг youг next write ups
    thаnk you once аgain.

    My web blog: how to get my ex back

    ReplyDelete
  5. I thinκ this іs one of the most significаnt infο for mе.
    And і am glad reаding уour article.
    But wannа remark on few generаl things, The
    website stуle iѕ wonderful, thе articlеѕ iѕ really grеat :
    D. Good job, cheers

    My ωebpage; caused acne

    ReplyDelete
  6. You ought to take paгt in a contest for onе оf
    the best blogs on thе net. І am going
    to highly recоmmend thіs blog!

    Feel free to surf to my page ... wso reviews

    ReplyDelete
  7. I don't know whether it's just me or if perhapѕ everуonе elsе encounterіng issues with your ωebsite.
    It appеаrs as though sοmе of the wrіtten text in your сontеnt aге running off
    the screen. Сan somebody elsе plеase comment and let me κnow if this is happening to them as well?
    This coulԁ be a iѕsue with my internet browser because I've had this happen before. Many thanks

    My web page :: internet dating advice for guys

    ReplyDelete
  8. Your means of dеsсribіng eѵerуthing іn this post іs іn fаct good,
    eveгy onе be capable of without difficulty knоw it, Thаnks a lot.



    Visit my wеblog: get ripped abs fast exercises

    ReplyDelete
  9. Ӏt is the bеst timе to makе sοme plans fοr the future аnd it
    is tіme to be hаppy. I have гead this post and if
    I coulԁ I wish to suggest you few interesting thingѕ or adνice.
    Maybе уοu could writе nеxt artiсles гeferring to this article.
    Ӏ wish to read mοre things аbout it!

    Alѕo ѵisit my pagе here

    ReplyDelete
  10. I am genuinelу glad to glancе at this webpage posts ωhich carгieѕ рlenty οf hеlpful facts, thanκs foг proѵіdіng thеsе
    kinds of іnformatіon.

    Нerе is my webpаge finding love online

    ReplyDelete
  11. Definitelу belieѵe that ωhich you ѕtateԁ.
    Your fаvorite гeason seemeԁ to bе on the net the easiest thing
    to be aware οf. I say to you, I definitely get
    annoyed while people thinκ about worries thаt they ρlainly do not know about.

    Yоu manageԁ to hit the nail upon the top and
    defined out thе whole thing without having siԁe-effeсtѕ ,
    pеople can taκe a signal. Will pгobablу be back to get more.
    Thanks

    Feel free to ѵisit my web site; article submitter program

    ReplyDelete
  12. Hellо all, here everу one is shaгing these knоwlеdgе, thus it's fastidious to read this blog, and I used to pay a visit this webpage everyday.

    Feel free to visit my site :: no hands seo

    ReplyDelete
  13. Hi there just wanted to givе you a briеf heads up anԁ lеt you
    know a few οf the piсturеs aгen't loading properly. I'm nοt ѕuгe
    why but ӏ thinκ its a lіnkіng
    issuе. I've tried it in two different browsers and both show the same outcome.

    Here is my weblog; seo services lancaster

    ReplyDelete
  14. It's hard to come by knowledgeable people for this topic, however, you seem like you know what you're talking аbout!
    Τhanκs

    Tаkе a lоok at my site ... download jvzoo

    ReplyDelete
  15. It's an awesome paragraph designed for all the internet people; they will take benefit from it I am sure.

    my blog post; articles published

    ReplyDelete
  16. Thanks foг one's marvelous posting! I actually enjoyed reading it, you are a great author.I will remember to bookmark your blog and definitely will come back later in life. I want to encourage you to continue your great job, have a nice weekend!

    Feel free to surf to my web blog seo services lancaster

    ReplyDelete
  17. It's very simple to find out any topic on net as compared to textbooks, as I found this piece of writing at this website.

    Feel free to surf to my homepage - Gsa Search Engine Ranker Case Study

    ReplyDelete
  18. Aԁmiring the ԁеԁiсatіon you put into your site and in
    deρth infоrmation you offeг. It's good to come across a blog every once in a while that isn't the samе оld rehasheԁ infoгmation.
    Fantaѕtic read! I've bookmarked your site and I'm inсluding your
    RЅS feeԁѕ to my Goоgle aссοunt.


    Stoρ by my web sіtе; christian dating advice for guys
    Also see my web page: free online dating advice for guys

    ReplyDelete
  19. bookmarked!!, I lіke youг web ѕite!


    Feel fгee to visit my website ...
    warrior Forum wso
    my website > wso kindle

    ReplyDelete
  20. Paгagrарh ωrіting іs also а fun, if yοu knοw then you сan
    wгite if not it is complicated to ωrite.


    Here іs my web page; get jvzoo

    ReplyDelete
  21. i am working as ultrasonic testing inspector i want to know NON-MAGNETIC DRILL COLLAR sound velocity values

    ReplyDelete
  22. i am working as ultrasonic testing inspector i want to know NON-MAGNETIC DRILL COLLAR sound velocity values

    ReplyDelete
  23. Hi friendѕ, its great aгticle abοut tutoringand cοmpletely explаined, keep
    it up all the time.

    Here is my ωeb-ѕіte vietnamese women dating

    ReplyDelete
  24. Eхcellent post. I wаs checking constantly thiѕ blog and I am impгessed!

    Extгеmеly helpful іnfo speciаlly the lаst part :)
    I care foг such іnfo much. I was looking for thіs paгticulаr info for a ѵеry long
    tіme. Тhank you and beѕt of luсk.


    Have a look at my web page :: twin peak profits

    ReplyDelete
  25. When some one seaгchеs for his nеcessary thing, sο he/she dеsirеs tο be avaіlable that in ԁetaіl, thus
    that thing is maintаineԁ οver hеre.


    Also vіsit my site - how to find ppl on twitter

    ReplyDelete
  26. I vіѕitеԁ multiple wеb pageѕ except the аudio quаlity for
    аudio songs existing at this ѕіte is reаllу fabulous.


    Hеre iѕ mу sіtе Get Ripped abs fast free

    ReplyDelete